51c060 Sauer Danfoss Motor 51 Series Moror and 51-1 Bent Axial Piston Motor

Danfoss 51c060 motor Series 51 and 51-1 Bent Axial Piston Motor

Danfoss 51C060 motor 51 and 51-1 Variable Displacement Axial Piston Motor has a tilt block design incorporating spherical pistons.

51C060 hydraulic motors  design to work with other devices in closed loop systems.

Which are for the transmission and control of hydraulic power.

51C060 axial piston motors have a large ratio of maximum and minimum displacements (5:1) / (60 cm3 : 12 cm3).

All 51C060 motors start at full displacement.

51 The Danfoss series of motors can operate in Hydraulic Systems with a high level of maximum pressure up to 510 bar.

As well as reach speeds up to 7000 rpm. Motors have a wide range of control and adjustment devices.

series 51 and 51-1 variable displacement motors are bent axis design units, incorporating

spherical pistons.

These motors are designed primarily to be combined with other products in closed

circuit systems to transfer and control hydraulic power. Series 51 and 51-1 motors have

a large maximum / minimum displacement ratio (5:1) and high output speed capabilities.

SAE, cartridge, and DIN flange configurations are available.

A complete family of controls and regulators is available to fulfill the requirements of

a wide range of applications.

Motors normally start at maximum displacement. This provides maximum starting

torque for high acceleration.

The controls may utilize internally supplied servo pressure. They may be overridden by

a pressure compensator which functions when the motor is operating in motor and

pump modes. A defeat option is available to disable the pressure compensator override

when the motor is running in pump mode.