Understanding the Four Key Parameters of Hydraulic Pumps: Focus on Speed

When discussing hydraulic pumps, four key parameters come into play: pressure, speed, displacement, and flow, along with performance and efficiency. Each parameter has several subcategories. In this article, we will focus on the parameter of speed, which includes rated speed, maximum speed, and minimum speed.

Rated Speed:Rated speed refers to the maximum speed at which a hydraulic pump can operate continuously under rated pressure. This means the pump can run smoothly without causing any load or other adverse effects on the hydraulic pump.

Maximum Speed:Maximum speed is the speed at which a hydraulic pump can run for a short period, exceeding the rated speed, under rated pressure. This short-term operation must not harm the hydraulic pump, as running beyond this period can cause damage.

Minimum Speed:Minimum speed is the lowest speed at which a hydraulic pump is allowed to operate normally. Running below this speed can prevent the hydraulic system from functioning properly or may damage the hydraulic pump.

In general, the speed mentioned here is measured in revolutions per minute (RPM), indicating the number of revolutions in one minute.

For those unfamiliar with the parameter of pressure, please refer to our detailed discussion on the four key parameters of hydraulic pumps regarding pressure. If you have any questions or need further clarification, feel free to contact us. We at Xingying Hydraulic, a leading manufacturer in China, are always ready to assist you.

Welcome to reach out to us for any inquiries!

Contact Information:

• Company: Xingying Hydraulic

• Address: No. 128 Xuwang Road, Yunlong, Yinzhou, Ningbo, Zhejiang, China

• Phone/WhatsApp: +8615258332140

• Email: sales@xyhydraulic.com

• Director/CEO/General Manager: Ms. Jessie